I'm a person in a Japanese car shop.
I'm going to install it in "AUDI S3 2015 model PTS Right-hand drive (the Japanese specification)" using EVOALL.
All wiring was connected while referring to guide #30001.
Both of HARDWARE VERSION and FIRMWARE VERSION are set as guidance.
Program bypass option "D6" is set.
But PROGRAMMING PROCEDURE An LED is blue with step 4, and it doesn't flash on and off.
Blue light-emitting diode goes out.
And blue light-emitting diode is always in the state of the lighting up in IGN OFF state.
I'm in trouble. Can't I have some advice?
Everything has an installation experience in VOLKSWAGEN Golf GTI 2015 PTS before, and is successful with no problem on a guide street.
I think there are also no link mistakes of wiring this AUDI S3 from the experience.